DBS-Spiral Roller Brushes, type 230 and type 230/VDS

DBS-Spiral Roller Brushes, type 230 and type 230/VDS

A further variation of the "Throw-Away" system is type 230. It consists of continuously wound DBS-spiral brushes fitted to
a thin walled steel, stainless steel  or non-ferrous metal tubu-
lar shaft. The face width corresponds to the required total brush legth (BLG).

The complete "Throw-Away" brushes can be simply assem-
bled onto the customer´s existing shaft. This method avoids the costly return of the complete shafts when the brushes
have to be replaced.

 

Find your contact person

loading...
PLZ Your contact person:
Max Mustermann, D-12345 Musterstadt, Tel. 000-0000-000


Core systems

The complete "Throw-away" brushes type 230 can be supplied with adaptors to reduce the core inside diameter (KD) i. e. brushes with or without collar with suitable arbor holes (AL) for the different core systems WK1 and WK2.
Our roller brushes are supplied with a fill surface perfectly trimmed and/or ground for concentricity. The brushes with adaptor or bushes are electro-dynamically balanced at the intended rotation speed according to standard G 2.5 as per ISO 1940

DBS-Spiral Roller Brushes Type 230 & 230/VDS


TypeCore-Ø
KD (mm) (min. - max.)
Total-Ø
GD (mm) (min. - max.)
Face width
BLG (mm) (min. - max.)
           
Typ 23032 - 44080 - 600*100 - 1500*DXFenquiry
Typ 230-VDS32 - 44080 - 600*100 - 1500*DXFenquiry
Typ 230 Bushes flush32 - 44080 - 600*100 - 1500*DXFenquiry
Typ 230 - Bushes headed32 - 44080 - 600*100 - 1500*DXFenquiry

Max. bristle-Ø


KD (mm)Synthetic filaments (mm)Wire (mm)
32 - 400.800.20
50 - 801.200.50**
> 803.000.50**

** bigger wire sizes are possible but not used in general